Email:ryker@evosyncs.com

Honton HT-R392 220V BGA Rework Station Hot Air Infrared Preheating 3 Temperature Area

SKU: RTOL250

Comments or Messages

Description

New Honton HT-R392 220V 3 temperature zone hot air infrared preheat BGA reballing machine for xbox ps3 motherboard
HT-R392 is added one preheating function, you can brake out the humidity of the PCB before reworking them which can improve reworking success rate.
HT-R392 with movable PCB holder and is added a fixture which can be moved to right and left freely, which make BGA chip alignment is much more easy. But HT-R390 PCB holder is fixed to some extent, if you need to align the BGA chip needed rework to the hot air nozzle, you need to adjust the screw which takes much time.

Precision imported raw materials (temperature control instrumentation PLC heater) precise control of BGA desoldering process.
The machine uses the independent control of three-zone temperature control is more accurate. The first temperature zone. Second temperature zone can be set in paragraph 8 liters (down) 8 segments constant temperature control, which can store 10 groups of temperature curve.The third zone warm-up, independent temperature control to ensure fully preheat the PCB during the soldering process,
Machine with computer communication features built-in – serial port, external temperature interface software can be computer controlled.
Selection of imported high-precision thermocouples, precise temperature detection.
the upper part of the heating and bottom heating alone to take the temperature curve, the cross-flow fan rapid cooling principle to ensure that the PCB during the soldering process, will not be deformed.
Desoldering and soldering is completed with alarm function, with vacuum suction pen, convenient suction trips to the BGA desoldering.

PCB positioning using a V-shaped slot, flexible and convenient removable universal fixture, PCB protection.
The large thermal capacity of PCB and other high temperature requirements of lead-free soldering and so can easily handle.
Hot air Tsui 360 degree rotation, easy to replace. With a variety of size of hot air nozzle, special requirements can be customized for notebook computer motherboard, desktop computers, motherboards, and other large-scale circuit board repair, and cell phone motherboard micro maintenance of the chip
three temperature zones can be independently controlled to achieve the plants, drying, repairing function.
HT-392 Specifications:
(1) Power: Single phase 220V – 50/60HZ 4KVA
(2) Power: 800W Total Power: 4000W heating and the upper
Bottom heating power: 800W at the bottom of infrared heating
power: 2400W Standby power: 10W
(3) Temperature control: high-precision K-type thermocouple closed-loop control
(4).PCB positioning mode: V-groove + Z fonts universal fixture pairs of Y-direction adjustment
(5) PCB size: MIN 10mm * 10mm MAX 350mm * 400mm
(6) Infrared Preheating area: 210mm * 340mm
(7) Machine Dimensions: (or so) wide and 580mm * (before and after) long 580mm high 650mm
(8) Machine weight: Net weight 35KG
Item:

1* Honton HT-R392 220V BGA Rework Station Hot Air Infrared Preheating 3 Temperature Area

Additional information

Weight 38.6 kg
Dimensions 55 × 65 × 64 cm
Condition

1
1

Origin

Reviews

There are no reviews yet.

Be the first to review “Honton HT-R392 220V BGA Rework Station Hot Air Infrared Preheating 3 Temperature Area”

Your email address will not be published. Required fields are marked *

Related Products

Categories

Filter by price

Filter by color